↑ End Headings for tabs
Remington Industries offers this 3M™ Composite Film Electrical Tape #44, which is commonly used in applications such as stick-wound coils/transformers and in bobbin-wound coils for banding, anchoring, and insulating. Designed for continuous operation not exceeding 130°C per UL and CSA listings, the tape is coated on one side with a pressure-sensitive adhesive that does not require any heat, moisture, or other preparation to properly bond. The tan polyester film/nonwoven composite backing plus the thermosetting rubber adhesive make for an industrial-grade tape with a minimum breaking strength of 25 lb/in. The tape comes on rolls of 90 yards (82.3 meters), which have a 5-year shelf life from the date of manufacture when properly stored.
↑ Stop "Description" content here
- Type: 3M™ Composite Film Electrical Tape #44
- Backing Material: Tan Polyester Film/Nonwoven Composite
- Adhesive Material: Thermosetting Rubber
- Total Thickness*: 5.25 ± 0.75 mils
- Temperature Rating: 130°C (266°F)
- Mechanical Properties:
- Adhesion to Steel*, Minimum: 70 oz/in
- Breaking Strength*, Minimum: 25 lb/in
- Elongation*, Minimum: 15%
- Electrical Properties:
- Comparative Tracking Index (CTI): I – UL tested and meets the listed UL840 Material Group when tested to IEC 60112 on both sides of the tape
- Dielectric Breakdown*, Minimum: 4500 V
- Electrolytic Corrosion Factor: 1.0 – 3M Test Method ETM-54001, where 1.0 equates to no corrosion observed
- Insulation Resistance*, Minimum: 1 × 10¹² Ω
- Specifications Met:
- UL Component Recognized: UL510A Standard, Category OANZ2, File No. E17385
- CSA Certified: Standard C22.2 No. 66, File No. 093411, Class 9052-30
* ASTM D1000 Test Method - Properties measured at room temperature 23°C (73°F) unless otherwise stated
↑ Stop your "Specifications" content here
- Roll Length: 90 yd (82.3 m)
- Tape Width: 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/4", 1-1/2", 1-3/4", or 2"
↑ Stop your "Sizes" content here
3M is a trademark of 3M Company.
